Insulating glass silicone sealant

Quicky and neutral curing in room temperature, no corrosion to the contact area .
Environment-friendly products, no pullution to surrounding.
Good resistance against both high and low temperature
Strong adhesion to glass.

Properties:

No.	DESCRIPTION		TECHNICAL DATA
1	Appearance	Com A	Withe, paste
		Com B	Black, paste
2	Sag	Placed Vertically (mm)	≤ 1
3	Tack-free Time (Hours)		≤ 2
4	Agglutinated Time(Hours)		≤ 48
5	Working time(Min)		≥15
Belowed specification was measured after 7 days in the condition of 23℃, 50% relative humidity
1	Hardness(Shore A)		≥35
2	Adhesive strength (Mpa)		≥0.7
Standard	JC/T 486

Range of Use:
MF882 Silicone sealant be used for sealing Insulating Glass which in the field of contruction,vehicles and refrigeration.

Package:
The two component of MF882 Silicone Structural Sealant, the Com A and Com B which are packed at the weight ratio of 12:1.
Large Package:  Com A 200L/Metal barrel (Interior diameter: 570mm)
                      Com B 20L/Plastic barrel (Interior diameter: 285mm)
Medium Package: Com A 20L/ Plastic barrel (Net weight: 25kgs)
                        Com B 310ml/Plastic cartridge（Net Vol.: 310ml）

Storage:
Shelf-life 12 months stored in cool(below 27℃), dry and ventilated places.

Notes and Restricted application:

Structure assembly
Com B can’t be exposure long time, because it will react with the moisture of air.
In case of contact with eyes, rinse immediately with plenty of water.
Avoid long-term contacting with skins.
Avoid contaminating food, medicine or cosmetics.

Estimated consumption amount:

Standard cartridge packaged of MF890 silicone sealant, 300ml net volume.
Seal length unit: meter

	Seal Width(mm)
Seal Depth(mm)	6	9	12	15	20	25
6	8.3	5.6	4.2	3.3	2.5	2
9	5.6	3.7	2.8	2.2	1.7	1.3
12	4.2	2.8	2.1	1.7	1.3	1.0