General Purpose Silicone Sealant
Silicone Tech's general purpose silicone sealant is a single-component, neutral sealant,can used for indoor and outdoor facilities seal,caulking and require,superior resistance to most chemicals,free primer for most building material.
Features
Range of USE:
The sealant designed for waterproof and weatherproof sealing for all kinds of windows and doors glass as well as for non-porous building material.
Properties:
No. |
DESCRIPTION |
TECHNICAL DATA |
|
1 |
Appearance |
Black, grey,brown and white, etc |
|
2 |
Sag |
Placed Vertically (mm) |
≤ 1 |
3 |
Tack-free Time (minutes) |
≤10 |
|
4 |
Curing time (hours) |
3-7 |
|
Belowed specification was measured after 21 days in the condition of 23℃, 50% relative humidity |
|||
1 |
Low-temperature flexiblility ℃ |
-40 |
|
2 |
Adhesive strength (Mpa) |
≥0.6 |
|
3 |
Maximum elongation ratio % |
≥300 |
|
Standard |
ASTM C920, GB/T 14683 |
||
Package:
Cartridge package: 220ml, 240ml, 260ml, 280ml, 300 ml,310ml / cartridge , 24 or 25 cartridges/ carton.
Sausage package: 592 ml / cartridge , 20 cartridges / carton.
Storage:
18 months stored in cool(below 27℃), dry and ventilated places.
NOTES
Method of application
1. Surfaces where silicon shall be applied must be cleaned, dried and free of grease.
2. Injecting the sealant by hand-operated or pneumatic caulking gun and fill sealant in the joints. For better appearance, cover outside of the joint areas with masking tapes before application. Remove the masking tapes immediately after finishing.
Estimated consumption amount:
Standard cartridge packaged of silicone sealant, 300ml net volume.
Seal length unit: meter
|
Seal Width(mm) |
|||||
Seal Depth(mm) |
6 |
9 |
12 |
15 |
20 |
25 |
6 |
8.3 |
5.6 |
4.2 |
3.3 |
2.5 |
2 |
9 |
5.6 |
3.7 |
2.8 |
2.2 |
1.7 |
1.3 |
12 |
4.2 |
2.8 |
2.1 |
1.7 |
1.3 |
1.0 |
Download pdf