HANGZHOU SILICONE TECH ADHESIVE CO., LTD SILICONE SEALANT,ACRYLIC SEALANT,PU FOAM,HOT MELT BUTYL SEALANT

86-571-88351780 chinasealant@yahoo.com

HANGZHOU SILICONE TECH ADHESIVE CO., LTD    SILICONE SEALANT,ACRYLIC SEALANT,PU FOAM,HOT MELT BUTYL SEALANT

Two Coms Silicone for Double Glazing

Product Item: STC820
Category: Silicone Sealant
Views: 498
double glazing silicone
two componenets silicone sealant
double glazing sealant
Product Manual:Two components silicone sealant for double glazing

Inquiry

You can make an inquiry about this product.
Your e-mail will not be leaked.

  • PRODUCT DETAIL

The two components silicone sealant is a type of insulating glass secondary sealant, the sealant is neutral cured to form a high strength, fast curing, high modulus sealant.

Features:
1.Excellent adhesion to most common glazing substractes..
2.Excellent resistance to UV light, ozone and extreme temperatures.
3.Fast cure, rapid handling of IG units.
4.Non- sag in vertical and overhead joints
5.Variable ratio allowing for cure rate adjustment.

Package:
Large Package: Com A 265kg/ 190 L Drum Com B 26kg/ 19 Liter barrel
Medium Package: Com A 26kg/  19 Liter barrel, Com B 2.6kg/ 1.90 Liter barrel

Application:
To obtain good adhesion, the surfaces must be thoroughly cleaned with a mild non-sud,non-film forming detergent and flushed with clean hot water to remove all traces of detergent.
When using automatic mixers observe the correct setting of the dosing cylinder.  The mixing ratio according to volume is 9:1-12:1.  The two- component mixture must be applied within approximately 30 minutes,prepare only the amount that can be applied within this period of time.
The silicone sealant should not be applied below 5 Degree Celsius, the curing speed depends on the ambient temperature,.

Storage:
It's 128 months for the Com A part, and 12 months for Com B part from the date of manufacture date when store in original,unopened container between 10-30 Degree Celsius.



Skype

WhatsApp

WangWang

QQ
Email me

Mail to us